Colorado Well Data › Cheyenne County
Cheyenne County, Colorado: well depth, water level & drilling cost
✓ 924 DWR records · verified 2026-08-14
How deep are wells in Cheyenne County, Colorado?
The median drilled well depth in Cheyenne County is 270 ft, based on 562 wells with recorded depths in the state DWR database. Half of all wells fall between 193 ft and 325 ft; 90% are shallower than 385 ft. Wells drilled since 2016 have a median depth of 239 ft.
How much does it cost to drill a well in Cheyenne County?
Applying published per-foot rates to the local median depth of 239 ft: drilling and casing alone typically runs $5,975–$15,535; a complete system including pump, pressure tank, and hookup typically runs $14,340–$23,900. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Cheyenne County — never sold elsewhere.
What is the static water level in Cheyenne County?
The median static water level is 184 ft below ground surface (middle half of wells: 140 ft–230 ft), from 61 measurements.
How much water do wells in Cheyenne County produce?
The median tested yield is 17 gpm (middle half: 13 gpm–50 gpm), from 269 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Cheyenne County address — $29
Drilled depth distribution
Who drills wells in Cheyenne County?
Companies by number of wells permitted in this county, per well construction reports filed with the Colorado Division of Water Resources. Permits recorded without a licensed driller (owner-built, or approved by a professional engineer) are excluded.
| Driller | Wells since 2016 |
|---|---|
| Kemp's Well Service | 17 |
| Schaal Drilling Ltd LLC | 7 |
| Dmw Well & Pump Service | 5 |
| Mineral Exploration Drilling | 1 |
| Rocky Mtn Drilling And Pump Services LLC | 1 |
| Schaal Drilling | 1 |
See every driller with wells on record in Cheyenne County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from DWR records (DWR well permits, applications that were denied, withdrawn, cancelled or are still pending excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.