Colorado Well Data › Phillips County
Phillips County, Colorado: well depth, water level & drilling cost
✓ 2,209 DWR records · verified 2026-08-14
How deep are wells in Phillips County, Colorado?
The median drilled well depth in Phillips County is 272 ft, based on 1,462 wells with recorded depths in the state DWR database. Half of all wells fall between 218 ft and 305 ft; 90% are shallower than 340 ft. Wells drilled since 2016 have a median depth of 300 ft.
How much does it cost to drill a well in Phillips County?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Phillips County — never sold elsewhere.
What is the static water level in Phillips County?
The median static water level is 163 ft below ground surface (middle half of wells: 124 ft–195 ft), from 189 measurements.
How much water do wells in Phillips County produce?
The median tested yield is 20 gpm (middle half: 14 gpm–668 gpm), from 503 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Phillips County address — $29
Drilled depth distribution
Who drills wells in Phillips County?
Companies by number of wells permitted in this county, per well construction reports filed with the Colorado Division of Water Resources. Permits recorded without a licensed driller (owner-built, or approved by a professional engineer) are excluded.
| Driller | Wells since 2016 |
|---|---|
| Wellstone Services, LLC | 32 |
| Newbanks Pump Inc. | 29 |
| Charles Sargent Irrigation Co Inc | 9 |
| Sargent Irrigation Company | 9 |
| Wellstone Services LLC | 9 |
| M&S Drilling, Inc. | 6 |
| Grosch Irrigation Co., Inc. | 3 |
| Charles Sargent Irrigation, Inc. | 2 |
See every driller with wells on record in Phillips County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from DWR records (DWR well permits, applications that were denied, withdrawn, cancelled or are still pending excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.